Texas 4x4 by Texas Tops (956) 682-1148

Custom Fabrication for Ford F-150 in the Rio Grande Valley

The best-selling truck in America. Aluminum body from 2015 on.

Get a free quote (956) 682-1148
37 years in the Valley 3 locations Year-confirmed fitment

Fitting your Ford F-150

The F-150 comes in three bed lengths and three cabs, so we match accessories to your exact bed — a cap for a 5.5-foot SuperCrew will not fit a 6.5-foot bed. From 2015 the body is aluminum, which matters for bed liners and any drilling. The 2021+ trucks have more electronics, so lighting and sensor recalibration is common. The Lightning is electric and takes most of the same bed accessories.

What fits your Ford F-150

  • Three bed lengths — 5.5, 6.5, and 8 ft — so the bed is the first thing we confirm
  • Caps, tonneaus, and liners in all three bed sizes
  • Leveling kits and 2 to 4-inch lifts for the independent front suspension
  • Lighting and grille work on 2021+ trucks often needs sensor recalibration

What we check before ordering

  • The aluminum bed needs different liner prep than steel — bare aluminum must be etched

  • 5.5 and 6.5 ft beds are not interchangeable for caps or tonneaus

  • 2021+ trucks have cameras and sensors that can be blocked by bumper and grille parts

Ford F-150 fitment questions

What bed lengths does the F-150 come in?

5.5 ft, 6.5 ft, and 8 ft, depending on cab. Caps, tonneau covers, and liners are bed-specific, so we confirm your exact bed before ordering.

Does an aluminum F-150 bed need special liner prep?

Yes. Bare aluminum has to be scuffed and etched before a spray-on liner bonds, or it peels. That prep is most of the job on these trucks.

Will a light bar or grille block my front camera?

It can on 2021+ trucks. We check camera and sensor locations and recalibrate where needed so your driver aids keep working.

About custom fabrication

Custom fabrication is for the jobs a catalog part cannot solve. A lift kit, an oversize tire or an older truck moves the frame, the mounts and the clearances in ways a mass-produced bumper or step was never measured for. When a bolt-on part will not sit right, we build the part that does. Bumpers, rock sliders, bed racks, cages, fender work and one-off brackets are designed around your truck's actual measurements, then welded, fitted and finished in our shop in the Rio Grande Valley.

Full custom fabrication guide

What it costs on a Ford F-150

Entry
$300–$800 (brackets, mounts, simple step or trim work)
Mid
$800–$2,500 (custom bumper, slider set or bed rack)
Premium
$2,500+ (full bumper with winch and lights, cage or multi-part build)

Final price depends on your Ford F-150 year, cab, and bed. We quote up front.

Tell us your Ford F-150 year

37 years building and bolting on parts for trucks and 4x4s in the Valley, with locations in McAllen, La Feria and Brownsville. We measure your truck, quote the build up front, and will tell you honestly when a good off-the-shelf part is the smarter buy.

Get a free quote Call (956) 682-1148

Custom Fabrication for other trucks

More for Ford F-150